• Marketing Centre: North of Xinxi 3rd, Lunjiao Town, Shunde, Foshan,Guangdong, China
    Factory Add: Kunshan East Road, Hecheng Town, Heshan City, Jiangmen, Guangdong, China

Some precautions for paper lamination machine.

Nov 15 2020

The precautions we should know during the purchase and use of the paper laminator. The quality of the tissue paper will cause inaccurate mounting by the paper lamination machine.

In daily consumption, the gripping parts of the tissue paper are torn due to the inaccurate transfer of the grippers of each group when the tissue is printed. Therefore, when mounting with a paper laminator, it is easy to smash the tissue paper into a bent or folded state during the paper feeding process, and the phenomenon of misalignment between the tissue paper and the corrugated cardboard will be formed after mounting. When this happens, we must adjust the handover time of the gripper to avoid tearing the gripper edge of the tissue.

paper lamination machine

In addition, if the moisture content of the tissue is not suitable or the stacking is not uniform, it is easy to cause the edge of the gripper to appear curled. At this time, the front gauge working surface on the paper feeding chain and the edge of the gripper paper are not in a straight line contact and push state. Under this condition, the laminated cardboard will also make the face paper protrude from the corrugated cardboard. The protruding tissue paper is easy to bend and the pre-regular position is not correct, and the semi-waste product cut out will also cause errors. This requires us to control the moisture content of the facial paper, and avoid high moisture content to reduce its stiffness.

As for the semi-waste paper after printing, glazing, calendering or laminating, we must stack them uniformly to avoid deformation and curling. In this way, inaccurate phenomenon can be prevented when the surface paper and corrugated paper are pasted. I want to remind everyone here that special attention should be paid to the usual inventory placement of facial tissues. Regarding its temperature, humidity, and leveling level, there must be a quantitative specification and strict implementation. It may be neglected for a while, which may lead to the loss of a batch of products.